Armin Akbarzadeh; Hamid Namazi; Ayub Gharebeigi Tavabeh; Seyyed Arash Haghpanah; Doroudchi Alireza
Volume 12, Issue 3 , July 2024, , Pages 117-123
Abstract
Objective: Intra-articular screw penetration is a probable complication of coronoid fracture fixation. Thepresent study aimed to determine the best radiography technique for visualizing the proximal radioulnar joint(PRUJ) space. Moreover, it aimed to determine the safe angle and length of the screw to ...
Read More
Objective: Intra-articular screw penetration is a probable complication of coronoid fracture fixation. Thepresent study aimed to determine the best radiography technique for visualizing the proximal radioulnar joint(PRUJ) space. Moreover, it aimed to determine the safe angle and length of the screw to avoid PRUJ penetrationduring coronoid fracture fixation.Methods: The Mimics software was used to construct a three-dimensional model of a healthy man’s forearmfrom a computer tomography scan. It was analyzed using the Solidworks software to determine the X-ray anglethat clearly showed the PRUJ space to detect penetration of screws from the coronoid process into the PRUJand determine the maximum screw angle and length that could be used without intra-articular penetration. Toverify these findings, a cadaveric study combined with radiographs was conducted.Results: To visualize PRUJ space, the optimal X-ray angle was 13º lateral to the perpendicular line when theforearm was positioned at full supination. If the coronoid process was segmented into zones 1 (closest to theradioulnar joint) to 4 (farthest from the joint), the screw could only be inserted at a right angle in zone 1. In zones2, 3, and 4, inclination angles less than 15, 35, and 60 would prevent intra-articular penetration, respectively.Conclusions: The X-rays could visualize the PRUJ space with an anteroposterior radiograph at an angle of13º ulnar deviation from the perpendicular plane. During coronoid process fracture fixation, shorter screwswith less lateral inclination were safer when inserting screws in the zones of the coronoid process adjacent tothe PRUJ.
